Sharp Cooktop User Manual

INSTALLATION MANUAL

IMPORTANT SAFETY INSTRUCTIONS

If the information in this manual is not followed

exactly, a ﬁ re or electrical shock may result causing

property damage, personal injury or death.

• ALL APPLIANCES CAN TIP

• INJURY TO PERSONS COULD RESULT

• INSTALL ANTI-TIP BRACKET PACKED

WITH APPLIANCE

To reduce the risk of tipping the appliance, it

must be secured by the Anti-Tip bracket attached to the appliance.

See page 4 and page 6.
• This appliance must be electronically grounded in accordance

with local codes, or in their absence, with the National Electrical

Code ANSI/NFPA No. 70—latest edition in United States.

• The installation of appliances designed for manufactured

(mobile) home installation must conform with Manufactured

Home Construction and Safety Standard, title 24CFR, part

3280 [Formerly the Federal Standard for Mobile Home

Construction and Safety, title 24, HUD (part 280)] or when such

standard is not applicable, the Standard for Manufactured Home

Installation 1982 (Manufactured Home Sites, Communities and

Setups), ANSI Z225. 1/NFPA 501A- latest edition, or with local

codes in United States.

• Make sure the wall coverings and the cabinets around the

appliance can withstand the heat generated by the appliance.

Never leave children alone or unattended in the

area where an appliance is in use. As children grow, teach them

the proper, safe use of all appliances.

Stepping, leaning or sitting on the drawer of this

appliance can result in serious injuries and can also cause damage

to the appliance.

• Do not store items of interest to children in the cabinets

above the appliance. Children could be seriously burned

climbing on the appliance to reach items.

• To eliminate the need to reach over the cooktop, cabinet storage

space above the cooktop should be avoided.

• Do not use the drawer as a storage space. This creates a

potentially hazardous situation.

• Never use the appliance for warming or heating the

room.

• Do not store or use gasoline or other ﬂ ammable vapors and

liquids near this or any other appliance. Explosions or ﬁ res

could result.

• Reset all controls to the “off” position after using a

programmable timing operation.

IMPORTANT NOTES TO THE INSTALLER

•

Read all of the Installation Manual before installing the

appliance.

•

Remove all packing material from the drawer and cooktop

before connecting the electrical supply to the appliance.

•

Observe all governing codes and ordinances.

•

Be sure to leave these instructions with the consumer.

IMPORTANT NOTES TO THE CONSUMER

Keep this manual with your Operation Manual for future reference.

• As when using any appliance generating heat, there are certain

safety precautions you should follow. These are listed in the

Operation Manual. Read all and follow carefully.

• Be sure your appliance is installed and grounded properly by

a qualiﬁ ed installer or service technician. See page 7.

• To eliminate the need to reach over the cooktop, cabinet storage

space above the cooktop should be avoided or a range hood

installed.

UNPACKING AND EXAMINING YOUR

APPLIANCE

Remove all packing

materials from inside

the Microwave Drawer.

DO NOT REMOVE

THE WAVEGUIDE

COVER, which is

located on the top of

the Microwave Drawer

cavity.

Remove the feature

sticker, if there is one.

Check the drawer for

any damage, such as

misaligned or bent

d r awer, d a m age d

drawer seals and sealing surfaces, broken or loose drawer guides

and dents inside the drawer or on the front side of the drawer. If

there is any damage, do not operate the Microwave Drawer and

contact your dealer or a SHARP AUTHORIZED SERVICER.

IMPORTANT

Do not lift or move this appliance by the Micro-

wave Drawer handle.

Sealing

Surface

Microwave

Drawer

Cavity

Waveguide

Cover

Sealing

Surface