Zebra 50-12500-066 User Manual

This chapter describes symbology features and provides programming bar codes for selecting these features. 
Before programming, follow the instructions in 

To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in 
non-volatile memory and are preserved even when the linear imager scanner powers down.

Select a host type (see each host chapter for specific host information) after the power-up beeps sound. This is 
only necessary upon the first power-up when connected to a new host.

To return all features to default values, scan the 

. Throughout the programming 

bar code menus, asterisks (

) indicate default values.

In most cases, scanning one bar code sets the parameter value. For example, to transmit bar code data 
without the UPC-A check digit, simply scan the Do Not Transmit UPC-A Check Digit bar code under 

. The linear imager scanner issues a fast warble beep and the LED turns 

green, signifying a successful parameter entry.

Other parameters, such as Set Length(s) for D 2 of 5 require scanning several bar codes. See the individual 
parameter, such as Set Length(s) for D 2 of 5, for this procedure.

Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the 
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and 
bars and/or spaces do not merge.

Feature/Option

Indicates Default

Option Hex Value