Zebra 50-12500-066 User Manual
SYMBOLOGIES 11 - 9
Decode UPC/EAN/JAN Supplementals
Parameter # 10h
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2,
EAN 13+2). The following options are available:
EAN 13+2). The following options are available:
•
If you select Ignore UPC/EAN with Supplementals, and the linear imager scanner is presented
with a UPC/EAN plus supplemental symbol, the linear imager scanner decodes UPC/EAN and ignores
the supplemental characters.
with a UPC/EAN plus supplemental symbol, the linear imager scanner decodes UPC/EAN and ignores
the supplemental characters.
•
If you select Decode UPC/EAN with Supplementals, the linear imager scanner only decodes UPC/EAN
symbols with supplemental characters, and ignores symbols without supplementals.
symbols with supplemental characters, and ignores symbols without supplementals.
•
If you select Autodiscriminate UPC/EAN Supplementals, the linear imager scanner decodes
UPC/EAN symbols with supplemental characters immediately. If the symbol does not have a
supplemental, the linear imager scanner must decode the bar code the number of times set via
UPC/EAN symbols with supplemental characters immediately. If the symbol does not have a
supplemental, the linear imager scanner must decode the bar code the number of times set via
before transmitting its data to confirm that
there is no supplemental.
•
If you select one of the following Supplemental Mode options, the linear imager scanner immediately
transmits EAN-13 bar codes starting with that prefix that have supplemental characters. If the symbol
does not have a supplemental, the linear imager scanner must decode the bar code the number of times
set via
transmits EAN-13 bar codes starting with that prefix that have supplemental characters. If the symbol
does not have a supplemental, the linear imager scanner must decode the bar code the number of times
set via
before transmitting its data to confirm
that there is no supplemental. The linear imager scanner transmits UPC/EAN bar codes that do not have
that prefix immediately.
that prefix immediately.
•
Enable 378/379 Supplemental Mode
•
Enable 978/979 Supplemental Mode
•
Enable 977 Supplemental Mode
•
Enable 414/419/434/439 Supplemental Mode
•
Enable 491 Supplemental Mode
•
Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed
previously.
previously.
•
Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit
user-defined prefix. Set this 3-digit prefix using
user-defined prefix. Set this 3-digit prefix using
•
Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either
of two 3-digit user-defined prefixes. Set the 3-digit prefixes using
of two 3-digit user-defined prefixes. Set the 3-digit prefixes using
•
Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any
prefix listed previously or the user-defined prefix set using
prefix listed previously or the user-defined prefix set using
.
•
Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with
any prefix listed previously or one of the two user-defined prefixes set using
any prefix listed previously or one of the two user-defined prefixes set using
.
NOTE
If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see
to enable Bookland EAN, and select a format using
NOTE
To minimize the risk of invalid data transmission, select either to decode or ignore supplemental
characters.
characters.