Zebra 50-12500-066 User Manual
11 - 34 LI4278 Product Reference Guide
Transmit Buffer
There are two methods to transmit the Code 39 buffer.
1.
Scan the Transmit Buffer bar code below, which includes only a start character, a plus (+), and a stop
character.
character.
2.
The linear imager scanner transmits and clears the buffer.
•
The linear imager scanner issues a low/high beep.
3.
Scan a Code 39 bar code with a leading character other than a space.
•
The linear imager scanner appends new decode data to buffered data.
•
The linear imager scanner transmits and clears the buffer.
•
The linear imager scanner signals that it transmitted the buffer with a low/high beep.
•
The linear imager scanner transmits and clears the buffer.
Overfilling Transmission Buffer
The Code 39 buffer holds 200 characters. If the symbol just read overflows the transmission buffer:
•
The linear imager scanner indicates that it rejected the symbol by issuing three long, high beeps.
•
No transmission occurs. The data in the buffer is not affected.
Attempt to Transmit an Empty Buffer
If you scan the Transmit Buffer symbol and the Code 39 buffer is empty:
•
A short low/high/low beep signals that the buffer is empty.
•
No transmission occurs.
•
The buffer remains empty.
Transmit Buffer
NOTE
The Transmit Buffer contains only a plus (+) character. In order to scan this command, set Code 39
lengths to include length 1.
lengths to include length 1.