Zebra 50-12500-066 User Manual

RADIO COMMUNICATIONS 4 - 19

When in multipoint-to-point mode, enable Parameter Broadcast to broadcast all parameter bar codes scanned 
to all other linear imager scanners in the piconet. If disabled, parameter bar codes are processed by the 
individual linear imager scanner only, and the linear imager scanner ignores parameters broadcast from other 
linear imager scanners or from the cradle.

Pairing is the process by which a linear imager scanner initiates communication with a cradle. Scanning 
Multipoint-to-Point activates multi linear imager scanner-to-cradle operation and allows up to three linear 
imager scanners to pair to one cradle for the CR0078-S and up to seven linear imager scanners for the 
CR0078-P. 

To pair the linear imager scanner with the cradle, scan the pairing bar code. A high/low/high/low beep 
sequence indicates that the pairing bar code was decoded. When a connection between the cradle and linear 
imager scanner is established, a low/high beep sounds.

When Parameter Broadcast is disabled on one scanner in the piconet, Parameter Broadcast is disabled 
on all scanners in the piconet.

1. The pairing bar code that connects the linear imager scanner to a cradle is unique to each cradle.
2. Do not scan data or parameters until pairing completes.
3. When the linear imager scanner is paired to the cradle in SPP Master or Cradle Host mode, the linear 
imager scanner automatically tries to reconnect to a remote device when a disconnection occurs that is 
due to the radio losing communication. For more information see 

.