Zebra 50-12500-066 User Manual
4 - 26 LI4278 Product Reference Guide
Page Button
The CR0078-P cradle offers a page button (see
). The page button is a
sensor that when touched, causes paired scanners to emit a beeping sequence. The default is Disable Page
Button.
Button.
1.
Place your finger over the button sensor
.
2.
Press down for approximately 1 second.
3.
The cradle LED will turn blue when the scanner is out of the cradle. The paired scanner will beep five
times. If multiple scanners are paired to the cradle, all the scanners will beep five times.
times. If multiple scanners are paired to the cradle, all the scanners will beep five times.
4.
Repeat as necessary.
Scan one of the following bar codes to enable or disable this feature.
NOTE
Scanners out of radio range will not beep when paged. Refer to
detailed radio range information.
*
Disable Page Button
Enable Page Button