Pioneer dvd-v7200 User Manual
<VRB1208>
30
Example) Playback of “analog stereo” audio channel from frame
1500 to 1800 without video.
1500 to 1800 without video.
1. Press the
button.
÷
The TITLE number will blink.
2. Press the
button to display LD.
÷
Be sure to set the laser barcode compatible disc command
to the TITLE LD display.
to the TITLE LD display.
3. Press
=
=
=
=
.
÷
The start frame number is entered.
÷
If the procedure up until this point has been done during
playback, the start frame that was input is searched for.
playback, the start frame that was input is searched for.
4. Press
=
=
=
=
.
÷
The stop frame number is entered.
5. As the VIDEO number will blink, press
.
÷
The playback picture disappears.
6. As the AUDIO number will blink, press
.
÷
Audio will be entered and the next step proceeded to.
7. Press the
button to return to the cursor mode.
NOTE:
Pressing the
button after step 2 will select the chapter input
mode. Refer to example 3 on page 27 for the input methods of
SEARCH CHAPTER and MARK CHAPTER.
VIDEO, AUDIO SETUP
VIDEO:
÷ Inputting 1 selects normal video output.
÷ Inputting 0 selects the background color set on the GUI menu
and cancels the playback picture.
÷ Inputting 9 maintains the previous mode. Input when you want
to leave the VIDEO setting as is and change other settings.
÷ 2 to 8 are invalid.
AUDIO:
On laser barcode compatible discs, laser disc digital audio and analog
audio are converted and recorded in the DVD format.
Audio can be selected as follows.
audio are converted and recorded in the DVD format.
Audio can be selected as follows.
÷ Inputting 0 selects the Audio OFF playback mode.
÷ Inputting 1 selects the “Analog audio 1/L” playback mode.
÷ Inputting 2 selects the “Analog audio 2/R” playback mode.
÷ Inputting 3 selects the “Analog audio” stereo mode.
÷ Inputting 5 selects the “Digital audio 1/L” mode.
÷ Inputting 6 selects the “Digital audio 2/R” mode.
÷ Inputting 7 selects the “Digital audio” stereo mode.
÷ Inputting 9 maintains the previous mode.
÷ 4 and 8 are invalid.
CAUTION:
When “Maintaining previous mode” is selected “*” is displayed on
the input screen.
the input screen.
Display when the example on the right
is input
is input
BC/COMMAND STACK GROUP 001: 001
TITLE
LD
SEARCH FRAME
01500
MARK
FRAME
01800
VIDEO
0
AUDIO
3
SETUP OF LASERBARCODE COMPATIBLE DISCS
BARCODE/COMMAND STACK SETTING
Barcode/Command Stack Setting