Sharp aquos lc 32d6u User Manual

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Press a/b to select “Input Select”, and then
press ENTER.

Press INPUT.
• A list of selectable sources appears.

Press INPUT again to select the input source.

• An image from the selected source

automatically displays.

• You can also select the input source by

pressing a/b.

• If the corresponding input is not plugged in,

you cannot change the input. Be sure to
connect the equipment beforehand.

For setting the signal type of external equipment
connected to INPUT 1 and INPUT 2 terminals.

Press a/b to select a signal type you want
to set, and then press ENTER.

• If the selected signal type is incorrect, images

are not displayed or displayed without any
color.

• If you set INPUT1 and INPUT2 to Auto, the TV will

automatically select the input signal.

• Check the operation manual of the external equipment

for the signal type.

• Setting INPUT 1 and INPUT 2 signal selection to “Auto”

when other equipment is connected will result in the
following connectivity priority.

Use this menu to select the input source.

LC-32D6U(E)-032-037

05.8.8, 10:22 AM

33