Sharp KB-3300JS User Manual

CLEANING AND CARE

Lock engaged for door removal.

Door removed from the range.

OVEN RACKS

Clean with soap and water, rinse and polish dry.
To remove stubborn soil, use an abrasive cleanser or steel wool. 

After cleaning, rinse the racks with clean water and dry with 

a clean cloth.
Note: 
•  If the racks become hard to slide, apply a small amount of 

cooking oil to a paper towel and wipe on the edges of the 

oven racks.

•  Do not leave in oven during self-cleaning cycle.

BROILER PAN AND GRID

Remove from oven at end of broiling. Drain away fats and 

accumulated juices. Sprinkle the grid with detergent and cover 

with wet paper towels or wet dish cloth. Allow to cool.
Wash in hot soapy water and scrub any remaining food particles 

with a soap filled pad or plastic scouring pad. Rinse and polish 

dry with a soft cloth.
The broiler pan and grid can be washed in the dishwasher.
Note: 
•  Do not leave in oven during self cleaning cycle.

OVEN LIGHT REPLACEMENT

CAUTION

Be sure the oven is unplugged and all parts are 

COOL  before  replacing  the  oven  lightbulb.  Do  not  turn 

the oven light on during the self-cleaning cycle. The high 

temperature will reduce lamp life.
The interior oven light will turn on automatically when the 

oven door is opened.
The oven light may be turned on when the door is closed by 

using the oven light switch located on the control panel.
The bulb is covered with a glass shield held in place by a 

wire holder.

TO REPLACE THE LIGHT BULB

1 Turn the power off at the main source.
2 Wear a glove with leather palm for protection against 

possible broken glass.
3 Replace bulb with a 40 watt appliance bulb only.
4 Press wire holder to one side to release glass shield. Replace 

glass shield.