Aleratec 350108 User Manual

www.aleratec.com

49

Power Requirements

Voltage: 100-240V

Current: 50-60Hz

Dimensions

(depth x width x height)

D: 150mm W: 116mm H: 27mm  

(5.9” x 4.6” x 1.0”)

Weight

235g (0.5 Lbs.)

Note: Specifications subject to change without notice. 

If your HDD PortaCruiser is not performing as expected, refer to the symptoms 

below, and follow the suggested corrective action. 

LCD Display

If the LCD display does not display any message and 

the backlight is not lit after powering on the HDD 

PortaCruiser, check that the power cable is properly 

connected and that the ON/OFF switch is turned on.

Error Messages

While the system is performing an operation and the 

operation is manually terminated, an error message will 

be shown in the LCD display. This may lead to an failed 

operation and could cause the HDD PortaCruiser to stop 

responding. If this happens, power the unit off, wait about 

ten (10) seconds, and then reapply power.

Hard Disk

If the HDD PortaCruiser does not detect one of the hard 

disk drives, verify that the drive is properly connected.

Keypad Buttons

If pressing the keys on the front panel produces no 

response from the system, the HDD PortaCruiser may still 

be busy with the previous operation. If the system idle, 

power the unit off, wait about ten (10) seconds, and then 

reapply power.

Startup/Shutdown

Do not power off the system while it is performing an 

operation. After a normal shutdown, wait about ten (10) 

seconds before reapplying power.