TEAC GF-350 User Manual
24
Erase or Unfinalize a CD-RW
The remaining time for the operation appears in the display.
When the operation has been finished, the display returns to
the track/time display.
When the operation has been finished, the display returns to
the track/time display.
During erasing/unfinalizing, no buttons will work.
Never turn the power off nor unplug the power cord.
Never turn the power off nor unplug the power cord.
<
This operation cannot be undone. If you are going to erase a
track or tracks, make sure that they are recordings that you
really want to erase.
track or tracks, make sure that they are recordings that you
really want to erase.
It is possible to erase the last recorded track. It is also possible to
erase a whole disc.
erase a whole disc.
Erase procedures are possible only on an unfinallized CD-RW
disc. If a CD-RW disc has been finalized, unfinalize it prior to
erasure. Remember that it is not possible to perform any erase or
unfinalize procedures on a CD-R disc.
disc. If a CD-RW disc has been finalized, unfinalize it prior to
erasure. Remember that it is not possible to perform any erase or
unfinalize procedures on a CD-R disc.
Press the CD button to select “CD”.
1
Load a recorded CD-RW.
2
Press the ERASE button in the stop mode.
3
“Un FIn” (unfinalize) appears when a finalized disc is loaded.
“Er” and the last track number appear when the disc hasn’t
been finalized. Each time the ERASE button is pressed, the
display changes as follows:
been finalized. Each time the ERASE button is pressed, the
display changes as follows:
“Er” and the number of the last track recorded on the disc
Select this to erase the last track on the disc.
<
This will not appear when only one track is recorded on the
disc.
disc.
Er ALL
Select this to erase all the tracks.
<
To cancel the erasing or unfinalizing process, press the STOP
button (H).
button (H).
Press the PLAY button (y ) to start erasing or
unfinalizing.
unfinalizing.
4
2
2
3
1
4