ACS hdg User Manual
Chapter 4: Operation
19 of 37
4-4 Shut-down
Use the following procedure to properly and safely shut down the machine:
1. Stop all feeding of material
2. Allow the granulator to run until the cutting chamber is completely empty.
3. Press the drive motor “stop” button. This shuts off the rotor drive motor.
4. After the granulator has stopped, press the airveyor stop button (if applicable) located
2. Allow the granulator to run until the cutting chamber is completely empty.
3. Press the drive motor “stop” button. This shuts off the rotor drive motor.
4. After the granulator has stopped, press the airveyor stop button (if applicable) located
at the blower motor.
5. Turn the main power switch to off.