Aleratec 260203 User Manual

www.aleratec.com

7

Your system was shipped in one box and contains the 1:15 Blu-ray/DVD/CD Tower 

Publisher SLS and cables.

Carefully open the box and remove the top protective foam padding.  Remove the 

following:

•  1:15 Blu-ray/DVD/CD Tower Publisher SLS
•  2 Power Cords
•  1 USB 2.0 Cable
•  1 Quick Start Guide
•  1 Installation CD

Note: It is important to keep the original shipping container and packaging.  
In the event you misplace your packaging and need to ship the 1:15 Blu-ray/
DVD/CD Tower Publisher SLS, you should first contact technical support 
to purchase a new shipping container.  Shipping the 1:15 Blu-ray/DVD/CD 
Tower Publisher SLS without proper packaging will void your warranty.

Plug the 2 power cords into the power supply of the 1:15 Blu-ray/DVD/CD Tower 

Publisher SLS, also located on the rear side (make sure the red switch is set at 115 

VAC for US operation). Plug into a standard 115 VAC outlet.

Plug the USB 2.0 Cable into the USB connector located on the center rear of the 

1:15 Blu-ray/DVD/CD Tower Publisher SLS.  Connect the other end of the USB 

cable into an available USB 2.0 port on your PC.

Note: Use only with a USB 2.0 port. This system cannot be used with USB 
1.1, as this will greatly affect system performance. If Windows displays a 
message that a fast USB device is detected on a slow USB port, then you 
will need to upgrade your computer by adding a USB 2.0 port.