TP-LINK TL-WR1043ND User Manual
![TP-LINK](https://files.manualsbrain.com/attachments/4d45e1da28d82d97a14cc52b904d065832fadc3e/common/fit/150/50/19c41f2620d27a16e36b513f2e907691223c5e6ec2f2f5e9ece0de10684a/brand_logo.png)
TL-WR1043ND
Wireless N Gigabit Router
-41-
•
Radius Server IP - Enter the IP address of the Radius Server.
•
Radius Port - Enter the port that radius service used.
•
Radius Password - Enter the password for the Radius Server.
•
Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
¾
WPA-PSK/WPA2-PSK - It’s the WPA/WPA2 authentication type based on pre-shared
passphrase.
passphrase.
•
Version
- you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select
WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
•
Encryption
- When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.
)
Note:
If you check the
WPA-PSK/WPA2-PSK
radio button and choose TKIP encryption, you will
find a notice in red as shown in
Figure 4-19
.
Figure 4-19
•
PSK Passphrase - You can enter ASCII characters between 8 and 63 characters or 8 to
64 Hexadecimal characters.
•
Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
4.6.3 Wireless MAC Filtering
Choose menu “Wireless→MAC Filtering”, and then you can control the wireless access by
configuring the Wireless MAC Address Filtering function, shown in
configuring the Wireless MAC Address Filtering function, shown in