Epson Epson User Manual

If you cannot access data on your hard disk or you are seeing

read/ write errors, the disk may have a physical problem.

Contact your Authorized EPSON Servicer or the EPSON
Connection.

Make sure the drive contains the correct CD-ROM disc. Make

sure the disc is rightside up and inserted correctly in the drive.

If your system can’t read the disc, make sure the drive has been
installed correctly. (See Chapter 5 for a slimline computer or

Chapter 6 for a tower computer.) Check that the cables are

securely connected. Make sure the ribbon cable is connected so

that the red wire on the ribbon cable is connected to pin 1 on
the drive. Also verify that the ribbon cable is attached to the

secondary PCI IDE interface and that the drivers are installed

correctly. (See “Installing the PCI IDE Drivers” in Chapter 2.)

Check that the master/ slave jumpers on the drive are set

correctly.

If you received documentation with your drive, check it for

additional solutions.

You must discharge your CMOS memory. To do this, you

need to place a jumper on JP49. See “Changing the Jumper

Settings” in Chapter 4 for details.