Epson Epson User Manual

Your computer has one multi-mode parallel (printer) port and

two serial ports. To connect a printer or other peripheral

device, refer to the illustrations under “Connecting System

Components” as you follow the appropriate instructions in this
section.

Follow these steps to connect a parallel device to your
computer:

1.

Place the parallel device and the computer so that the backs

are facing you.

2.

Align the connector end of the parallel cable with the printer
port and plug it in. If the connector has retaining screws,
tighten them.

This icon identifies the printer port.

3.

Connect the other end of the cable to the parallel device. To
secure the cable, squeeze the clips at each side of the device

port and push them into place.

4.

Plug the parallel device’s power cord into a grounded
electrical outlet.

If you want to take advantage of the port’s extended
capabilities, see “Using the Advanced System Setup Options”
in Chapter 2.