Epson Epson User Manual

The 

option defines the types of hard

disk drives connected to the primary and secondary IDE
interfaces in your system. When you select this option, you see

the Fixed Disk Setup screen.

Note

These options do not configure other IDE devices, such as

CD-ROM drives, connected to the secondary IDE interface.

If any of the drives you installed are larger than 528MB, make

sure the 

option is set to 

(the default setting). Set this option to 

if you are using

UNIX® or an operating system other than MS-DOS@ or Windows.

From this screen, you can configure each of the installed drives

by selecting them at these options:

The IDE Adapter 0 drives are the master and slave drives
connected to your primary IDE interface. The IDE Adapter 1
drives are connected to the secondary IDE interface.

Your computer comes with a hard disk auto-sensing feature. To

use it, select one of the drives you have installed from the Fixed

Disk Setup screen. On the screen that appears for that drive,
press 

Enter 

to select the 

option. The

system detects the type of hard disk drive, fills in the drive’s

parameters, and sets the remaining options on the screen.