Epson StylusPro10000 User Manual

4. Double-click the driver installation for your printer model. If you have 

the Photographic Dye Ink model, double-click Install Stylus Pro 
10000 With Photographic Dye Technology

. If you have the Archival 

Ink model, double-click Install Stylus Pro 10000 With Archival Ink 
Technology

.

5. Click OK in the next window to start printer software installation. You 

see windows opening on your screen during driver installation. On 
Windows 95 and NT, the Status Monitor 3 utility is also installed now.

6. Windows 95 or NT: Turn on your printer and go to step 7.

Windows 98, Me, or 2000: You see a window asking you to turn on 
your printer. Press the 

 

P Power button until the Operate light comes 

on. After a few moments, the software configures your printer port and 
installs the Status Monitor 3 utility.

7. When you see a message informing you that installation is complete, 

click OK.

8. Click the 

 icon to exit the installer. 

9. If you’re using Windows 95 or NT, or if the final installation 

completion screen asked you to do so, restart your computer now.

If you want to share the printer with other computers, see the next section 
for configuration instructions.

For instructions on using your printer software, see Chapter 4.

Follow the steps in the appropriate section to configure your computer to 
share the printer on a network:

•

•

“Setting Up on a Windows 95, 98, or Me Network” on page 1-19

•

SPro 10000 identifies 
the driver for the 
Photographic Dye 
Ink model, and SPro 
10000CF identifies the 
driver for the Archival 
Ink model.

If you’re using Windows 
2000 and have 
connected your printer 
with a parallel cable or 
network interface card, 
click the Stop Searching 
button at step 6 and go to 
step 7.