Epson StylusPro10000 User Manual

When you’re not using the roll paper belt, keep it wound around the end of 
the spindle.

If you need to remove the paper roll from the spindle, follow these steps:

1. Open the roll paper cover and lift out the roll and spindle. Lift out the 

left end of the spindle and roll first, and then the right end.

If the paper is loaded for printing, pull the paper set lever out to the 
released position, then roll up the paper before you remove the spindle.

2. Lay the roll down on a flat surface.

3. Loosen the movable paper stop by tapping it with your hand. 

4. Slide the paper stop off the end of the spindle.

5. Remove the roll from the spindle. 

roll paper belt

To avoid damaging the 
printer, never move the 
paper set lever while 
the Operate or Pause 
light is flashing.

To avoid damaging the 
spindle, do not tap the 
end of the spindle 
on the floor.