Tektronix AFG3000 User Manual
Syntax and Commands
3-38
AFG3000 Series Arbitrary/Function Generators Reference Manual
[SOURce[1|2]]:AM:INTernal:FREQuency
This command sets or queries the internal modulation frequency of AM modula-
tion for the specified channel. You can use this command only when the internal
modulation source is selected.
tion for the specified channel. You can use this command only when the internal
modulation source is selected.
You can select the source of modulating signal by using the
[SOURce[1|2]]:AM:SOURce [INTernal|EXTernal] command.
[SOURce[1|2]]:AM:SOURce [INTernal|EXTernal] command.
Group
Source
Related Commands
[SOURce[1|2]]:AM:SOURce
Syntax
[SOURce[1|2]]:AM:INTernal:FREQuency{<frequency>|MINimum|MAXimum}
[SOURce[1|2]]:AM:INTernal:FREQuency?[MINimum|MAXimum]
Arguments
<frequency>::=<NRf>[<units>]
where
<NRf> is the modulation frequency.
<units>::=[Hz | kHz | MHz]
where
<NRf> is the modulation frequency.
<units>::=[Hz | kHz | MHz]
Returns
<frequency>
Examples
SOURce1:AM:INTernal:FREQuency 10kHz
sets the CH 1 internal modulation frequency to 10 kHz.
sets the CH 1 internal modulation frequency to 10 kHz.