Epson MovieMate 62 User Manual

Problem Solving

■

Press the 

 button on the projector or the 

 button on the remote control to select 

the external video source. Allow a few seconds for the projector to sync up.

■

If you’re using a PC notebook, hold down the Fn key on the keyboard and press the 
function key that lets you display on an external monitor. It may have an icon such as 

, or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up 

after pressing it. Check your notebook’s manual or online help for details. 

On most systems, the 

 key lets you toggle between the LCD screen and the 

projector, or display on both at the same time.

If you connect the notebook while the projector or computer are already turned on, the 
function Fn key that changes the computer’s image signal to external output may not 
work. Turn the computer and the projector off and then back on again.

Signal not supported.

Press the 

 button on the remote control and check the 

Video Signal

 setting (see 

Press the 

 button on the remote control and select the appropriate aspect ratio.

Press the 

 button on the remote control and select the appropriate zoom setting. (Make 

sure the toggle switch on the remote control is set to the 

Func-

 position.)

■

If you’re using an extension cable, electrical interference may affect the signal.

■

Check the solutions on pages 65 and 66.

■

Press the 

 button on the remote control and check the 

Video Signal

 setting (see 

■

Press the 

 button on the remote control to select the best setting for your viewing 

environment.

■

Adjust the 

Color Saturation

 or 

Tint

 settings. See page 50.