Epson I+ User Manual
Before you connect the cables, take a look at the rear and front panels of
the main unit.
The
rear panel
Look at the rear panel to identify the Equity I+ input/output ports.
Figure 1-2 shows where you connect the peripheral devices.
WARNING: Do not connect the power cord until you have con-
nected all peripheral devices. Always check to see
that the power switch is off before you connect or
disconnect any peripherals.
Figure 1-2. Rear panel
Here are brief descriptions of each of the ports:
l
AC power outlet. Auxiliary power outlet. Some monitors (and other
types of peripherals) can be plugged into the main unit here, instead of a
types of peripherals) can be plugged into the main unit here, instead of a
wall outlet. The main unit’s power switch controls the monitor or
peripheral connected to this outlet. Power consumption should not
peripheral connected to this outlet. Power consumption should not
exceed 80 watts.
l
AC power inlet. Supplies electrical power to the computer. Always turn
the power switch off before you plug the power cord into an outlet.
the power switch off before you plug the power cord into an outlet.
1-4