Edelbrock 15015 User Manual

Catalog #15015
Rev. 6/05

Brochure #63-0413

TURBOCHARGER TO EXHAUST MANIFOLD GASKET

(For Turbocharger Kit #s 1500, 1501, 1502, 1503, 1504)

Catalog #15015

INSTALLATION INSTRUCTIONS

PLEASE study these instructions carefully before beginning this installation. If you have any questions, do not hesitate to contact
our

Technical Hotline at: 1-800-416-8628, from 7am-5pm, Monday-Friday, Pacific Standard Time or via e-mail at:

Edelbrock@Edelbrock.com.

DESCRIPTION: Stainless steel gasket used to seal the turbocharger turbine inlet to the exhaust manifold. It can also be used with

any Garrett T25 or T28 Turbocharger.

INSTALLATION

Edelbrock Corporation • 2700 California St. • Torrance, CA 90503

Tech Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.com

1. When attaching the turbocharger to the exhaust manifold, tighten the nuts in a criss-cross pattern. This will evenly compress

the gasket. Tighten the nuts in a few increments until the gasket is fully compressed.

2. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately 16 ft/lbs).