Epson PowerLite 1735W User Manual
Using Multi-Screen Display
30
A
Start Windows on the computer, then select "Start" -
"Programs" (or "All Programs") - "EPSON
Projector" - "Add/Remove Epson Virtual Display".
"Programs" (or "All Programs") - "EPSON
Projector" - "Add/Remove Epson Virtual Display".
The "Add/Remove Epson Virtual Display" screen is displayed.
B
Select the virtual display you want to use.
Up to four monitors can be added. In this case, a single virtual
display is to be used, so select one. 3When, for example, using
three projectors, such that you have to set multiple virtual displays,
only select as many displays as is necessary.
Any one of the displays can be selected.
display is to be used, so select one. 3When, for example, using
three projectors, such that you have to set multiple virtual displays,
only select as many displays as is necessary.
Any one of the displays can be selected.
C
Click "OK".
When you click "OK", the drivers for the virtual display are
enabled. At this point, it is normal for the display to flicker. Wait
for the "Add/Remove Epson Virtual Display" screen to close.
enabled. At this point, it is normal for the display to flicker. Wait
for the "Add/Remove Epson Virtual Display" screen to close.
f
Virtual display arrangement
After starting EMP NS Connection, the setting up of the virtual displays
varies between Windows and the Macintosh. The procedures are
explained separately, below.
For Windows, follow the procedure below.
For the Macintosh, go to s
varies between Windows and the Macintosh. The procedures are
explained separately, below.
For Windows, follow the procedure below.
For the Macintosh, go to s
.
A
Select "Start" - "Programs" (or "All Programs")
-
"EPSON Projector" - "EMP NS Connection".
EMP NS Connection starts.
EMP NS Connection starts.
Procedure
Procedure
For Windows