Adam Equipment ocs-2 User Manual
User Operations
• Put the scale at a vertical position without any weight on the weighing hook.
• Press
the [On/Off] key, the display with show a test message and after 5
seconds will return to zero. Now the scale is ready for weighing.
• When pressing the [On/Off] switch, the scale will power off. The scale will
turn off after 60 seconds automatically after the last weighing to prolong
battery life.
battery life.
• [Hold] key: Press the [Hold] key to record the measured weight, pressing
the [Hold] key again returns to normal weighing.
• [Set] key: Press the [Set] key to change between lbs and kg.
• [Tare] key: This function has been specially designed for weighing
substances that require to be put into a container. First place empty
container on the hook and press the [Tare] key, the display will return to
zero. Now you can put the substances into the empty container and the
display will show the net weight.
container on the hook and press the [Tare] key, the display will return to
zero. Now you can put the substances into the empty container and the
display will show the net weight.
Batteries
When the display shows “
LO BAt
” replace the batteries.
Calibration
1. Press and hold down the [Tare] and [On/Off] key, when “
8888
” is displayed
release [On/Off] key and then release the [Tare] key. The A/D count will be
shown (about 1000-8000 value)
shown (about 1000-8000 value)
2. Press the [Tare] key, this will show “
CAL
” and then the first calibration weight
value.
3. Hang the calibration weight on the weighing hook and press the [Tare] key.
4. The second calibration weight value will be shown, hang this weight on the
weighing hook and press the [Tare] key.
5. The third calibration weight value will be shown, hang this weight on the
weighing hook.
6. The display will then show “
PASS
” and the current weight.
7. At any time to exit from Calibration press [On/Off] key.
@Adam Equipment Company 2005 P.N. 8021, December 2005
OCS-2_user_revA1
* * *