Adam Equipment 8141 User Manual
@Adam Equipment Company 2011 (P.N. 8141, C- 02/2011)
4
1.1
INTRODUCTION
The TBB 610S, TBB 2610S and TBB 2610T are Single Pan Balances of unequal arm type with 3
beams. They are often referred to as Triple Beam Balances. The TBB 2610S and TBB 2610T
models come complete with counter weights (3) for weighing up to 2610 grams above the basic
capacity. The maximum capacity is 2610g with the supplied counter weights. The TBB 610S is
identical to the TBB 2610S without the counter weights or legs. The TBB 2610T has an additional
counter weight beam for Tare of up to 225 grams in addition to weighing up to 2610 grams.
beams. They are often referred to as Triple Beam Balances. The TBB 2610S and TBB 2610T
models come complete with counter weights (3) for weighing up to 2610 grams above the basic
capacity. The maximum capacity is 2610g with the supplied counter weights. The TBB 610S is
identical to the TBB 2610S without the counter weights or legs. The TBB 2610T has an additional
counter weight beam for Tare of up to 225 grams in addition to weighing up to 2610 grams.
1.2
SETTING UP
•
Unpack carefully.
Note :
The TBB 2610S and TBB 2610T balance consists of the main
body and 3 auxiliary counter weights (2 each for 1kg loads, 1 for 500g load). Note that the
counter weights are not 1kg or 500g masses. They are used only to balance this amount of
mass.
counter weights are not 1kg or 500g masses. They are used only to balance this amount of
mass.
•
Place on a firm, level surface away from fans or open windows. Remove the rubber bumper
from under the pan support. Slide all the weights to the left. Make sure the 2 largest
weights fit into the notches on their beams. The front weight should point to zero.
weights fit into the notches on their beams. The front weight should point to zero.
•
To lock the TBB down using the optional Security lock, insert the locking mechanism into
the hole marked on the base of the TBB model. Follow the instructions supplied with the
lock and wrap the cable around a fixed object. Make sure the cable does not hit the beams
or the hanging weights.
lock and wrap the cable around a fixed object. Make sure the cable does not hit the beams
or the hanging weights.
•
Check the zero. The pointer on the right end of the beam should align with the zero mark.
Adjust the thumb screw on the left end of the beam, if necessary.
Capacity
2610 grams with counter weights
610 grams without counter weights
Tare
+225 g on TBB 2610T only
Readability
0.1 g
Beam
Range
Increment
Front
Beam
0-10 g
0.1 g
2
nd
Beam
0-500 g
100 g
Beam Calibration:
3
rd
Beam
0-100 g
10 g
Damping
Magnetic
Ruler
Inches ( " ) & centimetres (cm)
Lock Down Device
Uses Security Lock
Density Determination
Pan Size
152 mm (6") diameter
Stainless Steel
Overall Size (w x h x d)
505 x 110 x 160 mm
(20" x 4.3" x 6.3")
Net weight
2.7 kg (5.94 lb.)
English