HP Compaq KB-9965 311059-181 User Manual
Product codes
311059-181
Removal and Replacement Procedures
Removing the Rack Bezel (Rack Model Only)
To remove the rack bezel:
1. Remove the four Torx T-15 screws (two per side) securing the rack bezel to the
chassis (1).
2. Pull the rack bezel away from the chassis (2).
Figure 2-6: Removing the rack bezel (rack model only)
Reverse steps 1 and 2 to replace the rack bezel.
Removing the Access Panel
To remove the access panel:
1. Open the front bezel door (tower model only) and lay the server on its side with the
access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model
Only)” in this chapter.
Only)” in this chapter.
2. Extend the server from the rack (rack model only). Refer to “Extending the Server from
the Rack” in this chapter.
HP ProLiant ML570 Generation 2 Server Maintenance and Service Guide
2-9