Siemens gigaset 4010 hwcd8518(3)p-tsdl User Manual

Press the Mem/Prog key for 3 seconds

Press the Channel/Select key until “VIP Ring” appears

Press Ʒ or ͩ to select the ringer melody. (8 melodies)

Press the Mem/Prog key for confirmation

Press Exit to exit

Note: you must apply for “Show incoming call number” service
(or Caller ID Service) to validate this function.

Press the Mem/Prog key for 3 seconds
Press the Channel/Select key until “Int Ring” appears

Press Ʒ or ͩ to select the melody. (8 melodies)

Press the Mem/Prog key for confirmation

Press Exit to exit

You can register up to four handsets on your base. During the
registration, place the handsets close to the base. If you want to
know the registration number of each handset, press the “INT”
key on the handset, then the register number will be displayed
on the handset (HS 1, HS 2, HS 3, or HS 4).
Long press the “INT” key on the base (do not release until
registration for all handsets has been completed), until “CodE
____” is displayed on the LCD of the base.
Press the “INT” key on a handset (the handset and the base will
respectively display “HS 1” and “CodE ____” register numbers,
and when both the handset and the base ring, you can release the
key on the handset, then release the key on the base).

Activating ring
Be sure the handset is in standby.
Press the Mem/Prog key.
Then press the # key,the handset will sound a confirmation tone.

10