Edirol V1 video mixer User Manual

Connections

Use the appropriate type of video cable to connect the video (composite) or S-

video output jack of your video device to the V-1’s input jack.

Use the appropriate type of video cable to connect the V-1’s video

(composite) or S-video output jack to the input jack of your video output

device (e.g., television or video projector).

* The V-1 supports only signals that comply with NTSC/PAL formats. Operation may not be

stable if non-compliant signals are input.

* If a signal is input to both the video (composite) and S-video input jacks, the S-video signal

will take priority.

* To prevent malfunction and/or damage to speakers or other devices, always turn down the

volume, and turn off the power on all devices before making any connections.

* The video cables needed for making connections are not included with the V-1. You will need

to obtain commercially available video cables.

* If the cable length is not too long, you will obtain a better image by using an S-video cable to

make connections. However, if you cannot avoid using an extremely long video cable, use a
video (composite) cable rather than an S-video cable.

To prevent the inadvertent
disruption of power to your
unit (should the plug be pulled
out accidentally), and to avoid
applying undue stress to the
AC adaptor jack, anchor the
power cord using the cord
hook, as shown in the
illustration.

The V-1 does not contain an
audio mixer. Connect the
audio output of your video
device directly to your audio
system. If you want to mix the
audio from two or more
sources, you will need to use a
commercially available audio
mixer.