Epson C82315 User Manual

System 36, 9/24/48 element 4214 4214 model 2
System 38, AS400 dot matrix printer
and 5294 or 5394 or laser printer

remote controller (using ESC/P

c o m m a n d s )  

System 34 or 5251 9/24/48 element 5224 5224 (2P)
m12 remote dot matrix printer 5225 (2P)
controller or laser printer 5258 (P)

(using ESC/P

commands)

You should keep the following in mind when selecting the emulation.

Only the 3812 emulation supports HP laser printer commands.

If you have a choice between the 5224 and 4214 emulations, you should select

4214. The 4214 emulation adds control of the following features: lines per inch,

pitch, graphics, print quality, and single-sheet handling.

If your printer supports Epson Job Language (EJL) commands, do not change the
printer mode using the EJL commands or the command-pass-thru  feature while

the interface is installed. Also you may not be able to change the printer mode

using the control panel.

Never select the PostScript™ printer mode while this interface is installed.

Before installing this interface card you may need to set several jumpers,
depending on the following factors:

The type of Epson printer you are using
The type of IBM printer you want the interface to emulate
The type of twin-axial connector your host system uses

3