Seagate medalist 1080sl User Manual
Read before you begin...
Note. Throughout this manual the Medalist 1080sl SCSI is
referred to by its model number, ST51080N.
Application. Your Seagate
®
drive is designed for IBM and IBM-
compatible personal computers, Macintosh and other systems
using the SCSI interface.
using the SCSI interface.
Turn off the system power before attempting any installation.
Static discharge. Observe the following precautions:
•
Keep the drive in its static-shielded bag until you are ready to
complete the installation. Do not attach any cables to the drive
while it is in its static-shielded bag.
complete the installation. Do not attach any cables to the drive
while it is in its static-shielded bag.
•
Handle the drive by its edges or frame, and do not touch the
I/O connector pins or the circuit board.
I/O connector pins or the circuit board.
•
Before handling any components, put on a grounded wrist
strap, or ground yourself frequently by touching the metal
chassis of a computer that is plugged into a grounded outlet.
strap, or ground yourself frequently by touching the metal
chassis of a computer that is plugged into a grounded outlet.
•
Use antistatic padding on all work surfaces.
•
Avoid static-inducing carpeted areas.
Drive handling. The drive is extremely fragile—handle it with
care. Do not attach labels to any part of the drive.
care. Do not attach labels to any part of the drive.
Inspection. After you are familiar with the handling precautions
listed above, inspect the drive. If it appears to be damaged, call
your distributor or dealer immediately.
listed above, inspect the drive. If it appears to be damaged, call
your distributor or dealer immediately.
Warranty. See your authorized Seagate distributor or dealer.
Maintenance and repair. Seagate drives do not require mainte-
nance. The head/disc assembly is sealed; if you break the seal,
nance. The head/disc assembly is sealed; if you break the seal,
Medalist 1080sl SCSI Installation Guide, August 1995
3