Soyo SY-K7VTA Pro User Manual

If the system does not boot-up properly, the Voice Doctor will inform the

user by voice through internal/external speaker at what point in boot-up

sequence the problem arises.

Below are the possible errors the user may encounter:

7. The Processor might be damage or not installed properly

8. The memory module might be damage or not installed properly

9. VGA card might be damage or not inserted properly

10. No Keyboard connected

11. Defective HD-Driver (IDE)

12. Floppy might error

Voice Doctor supports two language, refer the table below on the language
you prefer.

After you have turned off your computer, clear the CMOS memory by

momentarily shorting pins 2-3 on jumper JP5, for a few seconds. Then

restore JP5 to the initial 1-2 jumper setting in order to recover and retain

the default settings.

Jumper JP5 can be easily identified by its white colored cap.

Short pin 2-3 for
at least 5 seconds to
clear the CMOS

Short pin 1-2
to retain new
settings

Note: You must unplug the ATX power cable from the ATX power
connector when performing the CMOS Clear operation.

1 2 3

1 2 3

1 2 3

1 2 3