Star Micronics TUP900 User Manual
Rev 0.01
TUP900 Series Specifications Manual
3-4
3-3 Paper Specifications
3-3-1 Thermal Paper roll
3-3-1 Thermal Paper roll
(1) Paper Width:
79.5 ±0.5 mm to 111.5 ±0.5 mm
(Rolled Dimensions: 80 +0.5/-1 to 112 +0.5/-1 mm)
(Rolled Dimensions: 80 +0.5/-1 to 112 +0.5/-1 mm)
(2) Paper Thickness:
65 to 150 µm
(3) Paper roll Outer Diameter:
Maximum
φ150 mm
Note 1) Use of optional parts enables up to
φ254 mm.
(4) Shaft Core Inner Diameter (mm)/Outer Diameter (mm):
When paper thickness is 65 to 100 µm:
Shaft core inner diameter: Min. 25.4 ±1 mm;
Shaft core outer diameter: Min. 31.4 ±1 mm
Shaft core outer diameter: Min. 31.4 ±1 mm
When paper thickness is 100 to 150 µm:
Shaft core inner diameter: Min. 50.8 ±1 mm;
Shaft core outer diameter: Min. 56.8 ±1 mm
Shaft core outer diameter: Min. 56.8 ±1 mm
Note 1) The tolerance value of the paper roll shaft core (paper tube) varies according to the
thickness of the paper that you use.
When using paper that is outside of the above specification ranges, paper jams may occur.
When using paper that is outside of the above specification ranges, paper jams may occur.
(5) Recommended Thermal Paper
Manufacturers
Manufacturer
Name
Quality Characteristics and Use
Paper
Thickness
(µm)
P220AG
Normal Type
65
HP220A
Long-storage Type
65
HP220AB-1
Long-storage Type
75
P220AB
Normal Type for Cards and Tickets
85
P220AC-1
Normal Type for Cards and Tickets
95
P220AC
Normal Type for Cards and Tickets
105
P220AD
Normal Type for Cards and Tickets
130
P220AE-1
Normal Type for Cards and Tickets
150
PB670
2-color Type (Red/Black)
75
Mitsubishi
Paper
Paper
PB770
2-color Type (Blue/Black)
75
PD150R
Normal Type
75
PD160R
Long-storage Type
65/75
PD750R
2-color Type (Red/Black)
75
Oji Paper
Company
Company
PD700R
2-color Type (Blue/Black)
75
P-320RB
2-color Type (Red/Black)
65
KSP
P-320BB
2-color Type (Blue/Black)
65
Nippon Paper
Industries
Industries
TF50KS-E2C
Normal Type
65
Note 1) Print density settings must be changed according to the type and thickness of the paper.
Density settings can be changed using the print density setting command <ESC> <RS> 'd'
n.
n.
(6) Head Adjust Lever on the Thermal Mechanism Module
The TUP900 Series printers require that the head position be adjusted according to the thickness of the
paper to be used to ensure high quality printing. The head position is adjusted by changing the position
of the head adjustment lever.
See the table below to set to the optimum lever position.
paper to be used to ensure high quality printing. The head position is adjusted by changing the position
of the head adjustment lever.
See the table below to set to the optimum lever position.
• When 65 µm
≤ Paper Thickness < 100 µm:
Normal Position
• When 100 µm
≤ Paper Thickness ≤ 150 µm:
Position for Thick Paper