Standard Horizon Gx5500s User Manual

GX5500S

Page 86

14.5.1 Changing the display to show Lat/Lon or Time and SOG

Factory default is “Your Vessel’s Current Position,” however, following the steps
below the GPS Information can be changed to “Course Over Ground (COG).”

1. Press and hold down the [CALL(MENU)] key until “

RADIO

SETUP

SETUP” menu appears.

2. Press the [ENT] key, then select “

NAV DISPLAY

NAV DISPLAY” with the

[

S]/[T] key.

3. Press the [ENT] key.
4. Press the [

T] or [S] key to select “Pos

Pos

Pos (Your Vessel’s Cur-

rent Position)” or “

Cru

Cru (Course Over Ground).”

5. Press the [ENT] key to store the data entered, then press

the [16/9] key to exit this menu and return to radio opera-
tion mode.

14.5.2 External Speaker AF Selection

The

AF SELECT

AF SELECT menu allows you to set the audio output level of the VH-310’s

External Speaker to a fixed level regardress of the VOL level setting of the VH-
310, which is useful when using the STANDARD HORIZON MLS-310 10W
amplified speaker with on/off volume control.

1. Press and hold down the [CALL(MENU)] key until “

Radio

Setup

Setup” menu appears.

2. Press the [ENT] key, then select “

AF SELECT

AF SELECT” with the [

S]/

[

T] key.

3. Press the [ENT] key.
4. Press the [

S] or [T] key to select “Pr

Pr” (External Speaker

Level is “Fixed”) or “

Po” (External Speaker Level is “Adjust-

able”).

5. Press the [ENT] key to store the data entered, then press

the [16/9] key to exit this menu and return to radio opera-
tion mode.