Siemens gigaset se551 User Manual
109
Configuring the Advanced Settings
Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / configure_router.fm / 25.10.2006
Sc
hablone 2
004_
12_2
7
USB
You can use your device's USB port to share a USB bulk memory or a USB printer with
users in your local network and publish your data on the Internet.
users in your local network and publish your data on the Internet.
ì
In the Advanced Settings menu, select USB.
ì
Activate the USB port on your device.
If a USB device is connected, its Status is displayed.
Safely Remove Hardware
ì
Click on this button and wait until any connected USB bulk memory or USB printer
is fully deactivated before disconnecting them from your device.
is fully deactivated before disconnecting them from your device.
ì
Click on OK to save the changes.
Note:
Generally speaking only devices that support USB V2.0 may be connected. However,
some devices with the earlier standard USB V1.1 still work.
Generally speaking only devices that support USB V2.0 may be connected. However,
some devices with the earlier standard USB V1.1 still work.
Note:
Depending on the status of the software in your device, it is possible that not all
USB functions will work exactly as described below. If necessary, check whether a
software upgrade is offered on the Internet.
Depending on the status of the software in your device, it is possible that not all
USB functions will work exactly as described below. If necessary, check whether a
software upgrade is offered on the Internet.