Siemens gigaset se551 User Manual
33
Configuring the local network
Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / configure_tcpip.fm / 25.10.2006
Sc
hablone 2
004_
12_2
7
Network configuration with Windows 2000
To integrate a PC with Windows 2000 into a network that is configured with a
Gigaset SE551 WLAN dsl/cable you must carry out the following steps:
1. Install the network services (see below).
2. Select computer names and workgroup (see page 34).
3. Install the TCP/IP protocol (see page 35).
4. Make TCP/IP protocol settings (see page 37).
5. Deactivate the http proxy (see page 39).
6. Deactivate the popup blocker (for Mozilla Firefox only, see page 39)
7. Synchronise the TCP/IP settings with the Gigaset SE551 WLAN dsl/cable
Gigaset SE551 WLAN dsl/cable you must carry out the following steps:
1. Install the network services (see below).
2. Select computer names and workgroup (see page 34).
3. Install the TCP/IP protocol (see page 35).
4. Make TCP/IP protocol settings (see page 37).
5. Deactivate the http proxy (see page 39).
6. Deactivate the popup blocker (for Mozilla Firefox only, see page 39)
7. Synchronise the TCP/IP settings with the Gigaset SE551 WLAN dsl/cable
Installing network services
You have to install the network services before the PCs in your network can access
shared resources. This is done as follows:
shared resources. This is done as follows:
ì
Click on Start – Settings – Control Panel.
ì
Double-click on the Network and dial-up connections icon.
ì
In the left-hand pane click on Add network components.