Epson 4SLC2-50 User Manual

If you are having problems with the diskette drive, check the
following:

1. If the drive does not seem to be working as it should, try

performing a similar operation with a diskette in another

computer’s drive, if you have access to one.

If the drive is making loud or unusual noises, stop the

current operation immediately and contact your Authorized

Epson Servicer.

If you have problems with your hard disk drive, check the

following:

1. Check the hard disk drive light. If you enter commands (such

as COPY) to access the hard disk, the light should be on when
the computer accesses the drive. If the light is blinking, there

may be a problem with the hard disk. Contact your

Authorized Epson Servicer if this occurs.

If you have set a time-out for the hard disk in the Setup

program and it has timed out, the hard disk drive requires

about 15 seconds to come back up to speed when you access it
again.

3. Make sure you have formatted the hard disk correctly for

MS-DOS or the operating system you are using. See the
instructions in your operating system manual.