Sennheiser Set 830-TV User Manual
11
Using the Set 830-TV
Using the Set 830-TV
To switch the Set 830-TV system on, proceed as follows:
1. Switch your sound source (e.g. TV) on. The transmitter
automatically switches on (see next chapter).
2. Put the stethoset receiver on. The receiver automatically
switches on (see page 12).
3. Adjust the desired volume (see page 13).
Switching the transmitter on/off
To switch the transmitter
on
:
왘
Switch your sound source on.
The transmitter automatically switches on. The opera-
tion indicator
The transmitter automatically switches on. The opera-
tion indicator
8
lights up green.
The transmitter doesn’t switch on?
왘
To switch the transmitter
off
:
왘
Switch your sound source off.
The transmitter automatically switches off after
3 minutes. The operation indicator
The transmitter automatically switches off after
3 minutes. The operation indicator
8
goes off.
To
disconnect
the transmitter
from the mains
:
왘
Pull out the mains connector from the wall socket.
Note:
When not using the transmitter for extended periods of
time (e.g. when you are on holiday), pull out the mains
connector from the wall socket. In this case, however, the
receiver’s rechargeable battery will not be recharged.
time (e.g. when you are on holiday), pull out the mains
connector from the wall socket. In this case, however, the
receiver’s rechargeable battery will not be recharged.