Swann Big Dome Deterrent User Manual

1. Firstly attach the camera onto the camera 
bracket. Keep the orientation of the dome in 
mind when mounting the camera.

3. Screw the camera bracket onto the bottom of 
the dome using the bracket retainer.

4. Thread the AV cable through the wall 
mounting bracket. Make sure the male DC plug 
is passed through the bracket so it can be 
connected to the camera. (See above image)

6. Fix the wall mounting bracket onto the dome 
by screwing in the 3 holding screws in a 
clockwise direction using a flat head screw 
driver.

2. Adjust the camera bracket to suit your viewing 
direction. Then secure the bracket into place by 
screwing the locking screw in a clockwise 
direction. 

9. Align the dome cover and dome ring over the 
holes. (See image above) 

7. Connect the AV and DC cable onto the back 
of the camera. This illustration shows how to 
connect the cables into the back of a Swann 
C500, but actual connections will vary 
depending on your camera.

5.  Now thread the cable into the bottom of the 
dome.

8. We highly recommend you test the camera 
now. Connect the other end of the AV cable into 
you TV/monitor and power up the camera to see 
if you get a picture. Make sure the camera is in 
focus and all the appropriate settings are made. 
If possible, temporarily mount the dome to the 
desired location and check if the image is 
viewable. 

To mount the dome onto your wall, please visit your local hardware store for wall mounting bolts.
We recommend you get advice from your hardware store staff on the appropriate tools to use and 
wall mounting bolts for your wall. Please keep in mind the dome and wall mounting bracket weighs 
approximately 5.5 lb / 2.5 kg
Please make sure you remove the dark insert film if you wish to use this dome deterrent as a real 
dome camera. (See image below)

10. Secure the dome cover to the dome body 
using 3 screws supplied.