NEC express5800-100 series n8100-1635f User Manual

7-10  Troubleshooting

0B95 BMC FRU device failure
0B96 BMC SDR Repository

failure

0B97 BMC SEL device failure
0B98 BMC RAM test error
0B99 BMC Fatal hardware error

1. Take one of the following measures to reboot (reset) the

modular server.
* Issue an OS command.
* Press Ctrl + Alt + Del.
* Issue a command from Web browser of EXPRESSSCOPE

Engine or NEC ESMPRO Manager.

2. Take one of the following measures to power off the modular

server and then on.
* Power off the modular server from OS, then press the

POWER/SLEEP switch to power on.

* Press the POWER/SLEEP switch to power off the modular

server, then press it again to power on.

* Issue a command from Web browser of EXPRESSSCOPE

Engine or NEC ESMPRO Manager.

3. Power off the modular server by issuing an OS command or

press the POWER/SLEEP switch. Take the modular server
out of the Module Enclosure, and install it again. Then, press
the POWER/SLEEP switch to turn on the modular server.

4. If the same error persists, contact your service representative.

0BB0 SMBIOS - SROM data

read error

0BB1 SMBIOS - SROM data

checksum bad

1. Take one of the following measures to reboot (reset) the

modular server.
* Issue an OS command.
* Press Ctrl + Alt + Del.
* Issue a command from Web browser of EXPRESSSCOPE

Engine or NEC ESMPRO Manager.

2. Take one of the following measures to power off the modular

server and then on.
* Power off the modular server from OS, then press the

POWER/SLEEP switch to power on.

* Press the POWER/SLEEP switch to power off the modular

server, then press it again to power on.

* Issue a command from Web browser of EXPRESSSCOPE

Engine or NEC ESMPRO Manager.

3. Power off the modular server by issuing an OS command or

press the POWER/SLEEP switch. Take the modular server
out of the Module Enclosure, and install it again. Then, press
the POWER/SLEEP switch to turn on the modular server.

4. If the same error persists, contact your service representative.