NEC express5800-100 series n8100-1635f User Manual

Notes on Using Your Modular Server    1-3

Do not use the equipment in the place where corrosive gases exist.

Make sure not to locate or use the modular server in the place where
corrosive gases (sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine,
ammonia, ozone, etc) exist.
Also, do not set it in the environment where the air (or dust) includes
components accelerating corrosion (ex. sulfur, sodium chloride) or conductive
metals. There is a risk of a fire due to corrosion and shorts of an internal
printed board.

Do not handle the modular server if it is installed in the Module Enclosure.

To install or remove an option from the modular server, first turn off the power
of the modular server and remove the modular server from the Module
Enclosure. If you touch components on the modular server with it connected
to the Module Enclosure, you may get an electric shock.

Do not install or remove two or more modular servers at a time.

Install or remove modular servers one by one. If you install or remove two or
more modular servers at a time or a modular server with the cover of another
slot removed, you may get an electric shock.

Do not look into the optical disk drive.

A laser beam used in the optical disk drive is harmful to the eyes. Do not look
into or insert a mirror into the drive while the drive is powered. If a laser beam
is caught in your eyes, you may lose your eyesight.