Bosch fw5 User Manual
12
en | Browser connection
Camera Browser Interface
AM18-Q0605 | v5.0 | 2011.07
Software manual
Bosch Security Systems
1.2
Establishing the connection
The camera must have a valid IP address to operate on your
network and a compatible subnet mask. The default address
pre-set at the factory is 192.168.0.1
1.
Start the Web browser.
2.
Enter the IP address of the camera as the URL.
3.
During initial installation, confirm any security questions
that appear.
Note:
If you do not connect, the camera may have reached its
maximum number of connections. Depending on the device and
network configuration, each camera can have up to 25 web
browser connections, or up to 50 connections via Bosch Video
Client or Bosch Video Management System.
1.2.1
Password protection in camera
A camera offers the option of limiting access across various
authorization levels. If the camera is password-protected, a
message to enter the password appears.
1.
Enter the user name and the associated password in the
appropriate fields.
2.
Click OK. If the password is correct, the desired page is
displayed.
1.3
Protected network
If a RADIUS server is used for network access control (802.1x
authentication), the camera must be configured first. To
configure the camera, connect it directly to a computer using a
network cable and configure the two parameters, Identity and
Password. Only after these have been configured can
communication with the camera via the network occur.