Bosch fw5 User Manual

en | Advanced General Settings

Camera Browser Interface

AM18-Q0605 | v5.0 | 2011.07

Software manual

Bosch Security Systems

First, check the time zone setting. If it is not correct, select the 

appropriate time zone for the system:

1.

Click Set.

2.

Click Details. A new window opens showing an empty 

table.

3.

Click Generate to fill the table with the preset values from 

the camera.

4.

Select the region or the city which is closest to the 

system's location from the list box below the table.

5.

Click one of the entries in the table to make changes. The 

entry is highlighted.

6.

Click Delete to remove the entry from the table.

7.

Choose other values from the list boxes under the table, to 

change the selected entry. Changes are immediate.

8.

If there are empty lines at the bottom of the table, for 

example after deletions, add new data by marking the row 

and selecting values from the list boxes.

9.

When finished, click OK to save and activate the table.

The camera can receive the time signal from a time server using 

various time server protocols and then use it to set the internal 

clock. The device polls the time signal automatically once every 

minute. 

Enter the IP address of a time server.

Select the protocol that is supported by the selected time 

server. It is recommended to select the SNTP server protocol. 

This protocol provides high accuracy and is required for special 

applications and future function extensions. 

Select Time server if the server uses the RFC 868 protocol.