Bosch fw5 User Manual

Camera Browser Interface

Service | en

Bosch Security Systems

Software manual

AM18-Q0605 | v5.0 | 2011.07

The new firmware is unpacked and the Flash memory is 

reprogrammed. The time remaining is shown by the message 

going to reset Reconnecting in ... seconds. When the upload is 

completed successfully, the device reboots automatically.

If the operating status LED lights up red, the upload has failed 

and must be repeated. To perform the upload, switch to a 

special page:

1.

In the address bar of your browser, enter /main.htm after 

the device IP address, for example:

192.168.0.10/main.htm

2.

Repeat the upload.

Save configuration data for the camera to a computer and load 

saved configuration data from a computer to the device.

To save the camera settings:

1.

Click Download; a dialog box appears.

2.

Follow the instructions to save the current settings.

To load configuration data from the computer to the device:

1.

Enter the full path of the file to upload or click Browse to 

select the desired file.

2.

Make certain that the file to be loaded comes from the 

same device type as the device to be reconfigured.

3.

Click Upload to begin transmission to the device. The 

progress bar allows monitoring of the transfer.

Once the upload is complete, the new configuration is 

activated. The time remaining is shown by the message going to 

reset Reconnecting in ... seconds. When the upload is 

completed successfully, the device reboots automatically.

To work with an SSL connection, both sides of the connection 

must have the appropriate certificates. Upload one or more 

certificate files, one at a time, to the camera. 

1.

Enter the full path of the file to upload or click Browse to 

locate the file.

2.

Click Upload to start the file transfer.