Oregon Scientific I-300 User Manual

7

EN

3.   Press RESET after each battery change.

NOTE  Batteries should not be exposed to excessive heat 

such as sunshine or fire.

•   Install and start the PC software.
•   Select world cities in the software programme.
•   Set up the remote sensor.
•   Connect  the  USB  Communications  Hub  to  the 

computer.

•   Set  up  the  main  unit  and  register  it  with  the  USB 

Communications Hub.

IMPORTANT  

•   Always connect the USB Communications Hub to the 

computer.

•   Ensure Sleep Mode on computer is disabled as this 

will adversely affect the operation.

1.   Right click on Desktop.
2.   Choose “Properties”.

3.   Click on “Screen Saver” Tab in the Display Properties 

window.

4.   Click  on  “Power”  located  at  the  bottom  half  of 

window.

5.   A new window “Power Options Properties” will open.
6.   Under  “System  standby”  option,  choose  “Never”  in 

drop down menu.

7.   Click “Apply” and then click “OK”.
8.   Previous window will return.  Click “OK” to confirm and 

exit.

1.    Right click on Desktop.
2.   Choose “Personalize”.
3.   Click on “Screen Saver” Tab in the Display Properties 

window.

4.   Click on “Change Power Settings” located at the bottom 

half of window.

5.   Select  “High  Performance”  and  click  “Change  plan 

settings”.

6.   Click “Change advanced power settings”.
7.   Click “Sleep” and click “Hibernate after”.
8.   Click “Setting” and set “0” minutes.
9.   Click “Apply” and then “OK”.