OKI cx 1145 mfp User Manual
77
5
3. Polling Communication
This function is used when you want to receive a Fax from a sender upon your request.
The receiver can receive the Fax whenever he or she wants. This function is set at the sender's side by
storing the data of an original into memory. This operation is called polling transmission. The polling reser-
vation is valid for only 1 transmission; the data of the original will be cleared once it has been transmitted
upon the receiver's request. The sender can limit the receiver by attaching a password and the receiver's
Fax number so that any receiver not identified as the correct receiver with the password and Fax number
will not receive the Fax.
*
The receiver can receive the Fax whenever he or she wants. This function is set at the sender's side by
storing the data of an original into memory. This operation is called polling transmission. The polling reser-
vation is valid for only 1 transmission; the data of the original will be cleared once it has been transmitted
upon the receiver's request. The sender can limit the receiver by attaching a password and the receiver's
Fax number so that any receiver not identified as the correct receiver with the password and Fax number
will not receive the Fax.
*
Polling communication with a password can be used only with OKI Fax machines.
Polling transmission
1
Place the original(s).
2
Press the [FAX] button on the control panel.
3
Press the [OPTION] button and set the transmission conditions.
4
Press the [ADVANCED] button to enter the advanced menu, and then
press the [POLLING RESERVE] button.
press the [POLLING RESERVE] button.
5
Key in the password (4 digits) and/or Fax number (maximum 20 digits)
if necessary and then press the [ENTER] button.
if necessary and then press the [ENTER] button.