Oricom p80 User Manual

 
 

 

 

18

PIN code 
A PIN is required for registration and deregistration.  The ex-factory PIN is 
0000 but you can change this code. 
1. Press 

 

  during standby follow by the 8 key. 

2.  Enter the current PIN and press 

 . 

3.  Enter the new PIN.  It can contain from 0 up to 8 digits.  Press 

 . 

4.  Repeat the new PIN and press 

  to confirm the new code.  You will 

hear a confirmation tone if it is successful, or a reject tone if the same 
PIN is not entered. 

 
Reset 
If you reset the phone, all the settings will return to the factory default 
settings. 
1. Press 

 

  during standby. Then press and hold  DEL  until RESET 

is displayed.   

2. Press 

  to confirm the action. 

You cannot reset the phone if the handset has lost link with the base.  
UNAVAIL will be displayed.  Re-establish the link and try again. 
 
 
 
 
 
 
 
 

Press and hold 

 during standby to lock the keypad.    appears 

whenever keypad is locked. 
When the keypad is locked, you can still answer an incoming call by 
pressing  

 

.  During the call, the keypad functions as normal.  When the 

call is ended, the keypad will be locked again.  
To unlock the keypad, press any key and then press 

  when you see 

PRESS OK.