Sansui HDLCD4060 User Manual

EN 10

1. Open the battery compartment cover.

2. Install two “AAA” batteries (supplied).

3. Replace the battery compartment cover.

Before using the remote control, batteries must first be installed.

Use two “AAA” size batteries. The batteries may last 

approximately one year depending on how much the 

remote control is used. For best performance, it is 

recommended that batteries should be replaced on a 

yearly basis, or when the remote operation becomes 

erratic. Do not mix old and new batteries or different 

types. 

These precautions should be followed when using 

batteries in this device:

Use only the size and type of batteries specified.

Be sure to follow the correct polarity when 

installing the batteries as indicated in the battery 

compartment. Reversed batteries may cause 

damage to the device.

Do not mix different types of batteries together 

(e.g. Alkaline, Carbon-zinc or Rechargeable) or old 

batteries with fresh ones.

If the device is not to be used for a long period of 

time, remove the batteries to prevent damage or 

injury from possible battery leakage.

Do not try to recharge batteries not intended to be 

recharged; they can overheat and rupture. (Follow 

battery manufacturer’s directions.)

•

•

•

•

•

1.    (POWER) Button - Use to turn the power on/off 

to the TV.

2.DISPLAY Button - When you press this button, 

the current information will be displayed on a 

screen. To remove the display from the screen, 

press this button again.

3.Direct Channel Selection Buttons (0-9) - Allows 

direct access to any channel of the TV.

4.– Button -This button is used when selecting 

digital channels.

5.MENU Button - Use to display the On-Screen 

menu function.

6.CURSOR ▲/▼/◀/▶ Buttons - Use to operate the 

menu functions of the TV.

7.ENTER Button - Use to enter or select 

information for On-Screen operations.

8.MUTE Button - To turn off the sound, press this 

button once. The TV will be silenced and the 

symbol   will appear on the screen. The muting 

feature can be released by pressing the MUTE 

button again or one of the VOL (VOLUME) + / –

buttons.

9.VOL (VOLUME) + / – Buttons - Press the + 

button to increase, or the – button to decrease the 

sound level.

10.INPUT SELECT Button - Use to change the 

external input.

11.CCD Button - Use to select Closed Caption to 

“CC Off”, “CC On” or “CC on Mute”.

12.SLEEP Button - To set the TV to turn off after a 

preset amount of time, use the SLEEP button on 

the remote control.

13.PICTURE SIZE Button - Use to change the 

picture size.

14.RECALL Button - This button allows you to go 

back to the previous channel selected by just 

pressing the RECALL button. Press this button 

again to return to the channel you were watching.

15.EXIT Button - Press to remove setup menu.
16.AUDIO Button - Change soundtrack language.
17.CH (CHANNEL)   /   Buttons - To change the 

channels of the TV.

18.USB Media control buttons - See page 25.

J3PX0321A_EN.indd   10

J3PX0321A_EN.indd   10

11/12/12   2:36:16 PM

11/12/12   2:36:16 PM