Sanyo VCC-4794 User Manual

Printed in Japan

1AC6P1P2978--
L5BG2/US (0805KP-SY)

Printed on recycled paper

(Warranty attached)

Scanning system

: NTSC standard 525 lines, 60 fields/sec.

Image sensor

: 1/3" interline transfer method CCD

Number of effective pixels : 768 (H) x 494 (V)

Horizontal resolution

: More than 520 TV lines

Minimum illumination 
(approx.)

: Gain high: 0.01 lx (F 1.2, B/W mode), 

0.45 lx (F1.2, color mode)

Gain normal: 0.02 lx (F 1.2, B/W mode), 

0.6 lx (F1.2, color mode)

Video output 

: 1.0 V(p-p)/75 

Ω, composite, BNC

Video S/N ratio

: More than 48 dB (AGC off: More than 50 dB)

Backlight compensation

: OFF, Multi-spot metering (Normal/High), Center zone 

metering

White balance

: ATW/Manual

Gain control

: Normal/High

Light control

: Optical auto iris lens/Electronic iris (indoor use)

Lens mount

: CS mount

Flange back

: 12.5 mm ± 0.5 mm adjustment

Aperture compensation

: Normal/Sharp

Sync system

: Internal sync/Line lock

Day/Night mode

: Auto (Low/High), Manual (at CONTROL terminal)

Operating Environment

: Temperature: –10°C – +50°C (14°F – 122°F)

Humidity: less than 90 % RH (no condensation)

Power supply

: 24 V AC ±10%, 60 Hz/ 12 – 15 V DC

Power consumption 
(approx.)

: 3.7 W (with auto-iris lens)

Weight (approx.)

: 400 g (14.1 oz) (without lens)

Appearance and specifications are subject to change without prior notice 
or obligations.

In order to obtain warranty service, the product must be delivered to and picked up 
from an Authorized Sanyo Service Center at the user's expense, unless specifically 
stated otherwise in this warranty. The names and addresses of Authorized Sanyo 
Service Centers may be obtained by calling the toll-free number listed below.

THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR 
RENTED IN THE UNITED STATES OF AMERICA, EXCLUDING ALL U.S. 
TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES ONLY TO 
THE ORIGINAL RETAIL PURCHASER OR END-USER. THE ORIGINAL DATED 
BILL OF SALE, SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED 
TO THE AUTHORIZED SANYO SERVICE CENTER AT THE TIME WARRANTY 
SERVICE IS REQUESTED.
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO Fisher 
Company warrants this SANYO product against defects in materials and 
workmanship for the periods specified below. SFC will repair or replace (at its option) 
the product and any of its parts which fail to conform to this warranty. The warranty 
period commences on the date the product was first purchased or rented at retail.

This warranty does not cover (A) the adjustment of customer-operated controls as 
explained in the appropriate model's instruction manual, or (B) the repair of any 
product whose serial number has been altered, defaced or removed.
This warranty shall not apply to the cabinet or cosmetic parts, batteries or routine 
maintenance.
This warranty does not apply to uncrating, setup, installation, removal of the product 
for repair or reinstallation of the product after repair.
This warranty does not apply to repairs or replacements necessitated by any cause 
beyond the control of SFC including, but not limited to, any malfunction, defect or 
failure caused by or resulting from unauthorized service or parts, improper 
maintenance, operation contrary to furnished instructions, shipping or transit 
accidents, modification or repair by the user, abuse, misuse, neglect, accident, 
incorrect power line voltage, fire, flood or other Acts of God, or normal wear and tear.
The foregoing is in lieu of all other expressed warranties and SFC does not assume 
or authorize any party to assume for it any other obligation or liability.
SFC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WITH 
REGARD TO THIS PRODUCT (INCLUDING THE WARRANTIES OF 
MERCHANTABILITY AND FITNESS). IN NO EVENT SHALL SFC BE LIABLE FOR 
ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM 
THE OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE 
PERFORMANCE OF ITS OBLIGATIONS UNDER THIS WARRANTY DUE TO 
CAUSES BEYOND ITS CONTROL. SFC'S LIABILITY FOR ANY AND ALL LOSSES 
AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER, ARISING OUT 
OF OR IN CONNECTION WITH THE SALE, USE OR OWNERSHIP OF THIS 
PRODUCT INCLUDING WARRANTOR'S NEGLIGENCE, ALLEGED DAMAGED OR 
DEFECTIIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR 
LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE 
PRODUCT.

For your protection in the event of theft or loss of this product, please fill in the 
information below for you own personal records.

For product operation, authorized service center referral, service assistance or 
problem resolution, call

For accessories and/or parts, call

LABOR

PARTS

IMAGE DEVICE

3 YEARS

3 YEARS

3 YEARS

Model No.

Serial No.
(Located on back or bottom side of unit.)

Date of Purchase

Purchase Price

Where Purchased

Before installing and using the camera, please read this manual carefully. 
Be sure to keep it handy for later reference.

a DIMENSIONS

Before sending the camera out for repair, check the items below.

If the problem persists after checking these items, consult your 
dealer or an Authorized Sanyo Service Center.

■ If no image appears

• Is the coaxial cable attached securely?

• Are the power and voltage normal?

• Has the iris of the lens been adjusted correctly (with the LEVEL 

dial)?

• Is there adequate illumination?

■ If the image is unclear

• Is the monitor adjusted correctly?

• Is the flange-back position correctly set?

• Is the lens in focus?

• Is the lens clean?

Dirt or fingerprints on the lens can adversely affect the image. 
Gently wipe any dirt or fingerprints off the lens with a soft cloth or 
lens cleaning paper and cleaning fluid (commercially available).

The camera is a precision instrument. Handle it carefully and always 
follow the safety precautions. If the camera requires service, never 
try to repair it yourself or open the casing.

For servicing, maintenance, or repairs, consult your dealer or an 
Authorized Sanyo Service Center.

This installation should be made by a qualified service person and should 
conform to all local codes.

For the customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour la clientèle canadienne
Cet appareil numerique de la Classe B est conforme à la norme 
NMB-003 du Canada.

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following 
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.
Changes or modifications not expressly approved by Sanyo may void the user's 
authority to operate this camera.

■ In case of a problem

Do not use the unit if smoke or a strange odor comes from the unit, 
or if it seems not to function correctly. Turn off the power 
immediately and disconnect the power cord, and then consult your 
dealer or an Authorized Sanyo Service Center.

■ Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage 
to the unit. For repairs, consult your dealer or an Authorized Sanyo 
Service Center.

■ Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside 
the unit. If used with a foreign object inside, it could cause a fire, a 
short-circuit or damage. Be careful to protect the unit from rain, sea 
water, etc. If water or liquid gets inside the unit, turn off the power 
immediately and disconnect the power cord, and then consult your 
dealer or an Authorized Sanyo Service Center. 

■ Be careful when handling the unit 

To prevent damage, do not drop the unit or subject it to strong shock 
or vibration. 

■ Do not install this unit close to magnetic fields

The magnetic fields may result in unstable operation.

■ Protect from humidity and dust 

To prevent damage, do not install the unit where there is greasy 
smoke or steam, where the humidity may get too high, or where 
there is a lot of dust.

■ Protect from high temperatures 

Do not install close to stoves, or other heat sources, such as 
spotlights, etc., or where it could be subject to direct sunlight, as this 
could cause deformation, discoloration or other damages. 

Be careful when installing close to the ceiling, in a kitchen or boiler 
room, as the temperature may rise to high levels. 

■ Cleaning 

• Dirt can be removed from the cabinet by wiping it with a soft cloth. 

To remove stains, wipe with a soft cloth moistened with a soft 
detergent solution and wrung dry, then dry by wiping with a soft 
cloth.

• Do not use benzine, thinner or other chemical products on the 

cabinet, as this may cause deformation and paint peeling. Before 
using a chemical cloth, make sure to read all accompanying 
instructions. Make sure that no plastic or rubber material comes 
into contact with the cabinet for a long period of time, as this may 
cause damage or paint peeling.

L5BG2_US(VCC-4794)(ENGLISH).fm  1 ページ  ２００５年８月２４日　水曜日　午前１１時３９分