Sanyo avl-193 User Manual

Symptoms

Check item

! This may be caused by obstruction to the antenna due to high rise buildings 

or hills. Using a highly directional antenna may improve the picture.

“Ghost” or double images

! Check that the  AC power cord is plugged into the mains socket.
! Unplug the power cord, wait for 60 seconds. Then re-insert plug into the 

mains socket and turn on the unit again.

No power

! Check antenna connections at the rear of the unit to see if it is properly 

connected to the unit.

! Possible broadcast station trouble. Try another channel.
! Adjust the contrast and brightness settings.
! Check the Closed Captions control. Some TEXT modes could block 

the screen.

! Select a correct input.
! Is a non-compatible signal being input

?

No picture

! Increase the VOLUME.
! Check that the unit is not muted.

Good picture but no sound

• Adjust the contrast, color and brightness settings.

Good sound but poor color

! Sometimes, poor picture quality occurs when having activated an S-

VHS camera or camcorder connected and having connected another 
peripheral at the same time. In this case, switch off one of the other 
peripherals.

! Check whether the room is too bright.

Poor picture

! Check the antenna connection.

! This may be caused by electrical interference (e.g. Hairdryer, nearby 

neon lights, etc.).

! Turn off the equipment.

! Check whether the batteries are working. Replace if necessary.
! Clean the remote control sensor lens on the unit.
! Do not use the remote control under strong or fluorescent lighting.
! The batteries should be inserted with polarity (+, -) aligned.

Snowy picture and noise

Horizontal dotted line

Television not responding to
remote control

! Check if you have selected the correct D-Sub mode in your PC.

No stable or not
synchronized D-Sub picture

No output from one
of the speakers

! Adjust Balance in the SOUND menu.

28

+ Do not use in hot or cold rooms (locations)
• When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly 

delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight 

or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.

(Storage temperature:  0°C to +50°C                Working  temperature: 5°C to +40°C )

Control buttons do not work

! Unplug the power cord, wait for some seconds. Then re-plug the power 

cord and turn on the unit again.